EZCubo Wireless ADSL CPE

EZPlex ADSL DSLAM

EZCubo
ADSL CPE

EZCubo Wireless ADSL CPE

The EZCubo Wireless ADSL Router is an all-in-one
device in a compact size package that contains a four-port high-speed 10/100Mbps auto-negotiating Ethernet interface,
a built-in 802.11b fully compliant Wireless LAN Access Point, and one full-rate ADSL port.

The Router is an ideal solution for users to share the broadband Internet access with just one ADSL account. Incorporating built-in NAT implementation, it is able to serve
up to 4 users on the Ethernet LAN, and up to 16 users on the 802.11b Wireless LAN, for the speed of up to 8Mbps Internet access without any extra cost for hub or switch. With the flexibility and scalability, it can server up to 253 users when additional hub or switch implements. And for the mobile users with WLAN capability, it will be more enjoyable without the limitations of wires and cables.

Features

Feature Conexant chipset

ARM940T Processor

Downstream up to 8Mbps, upstream up to 1Mpbs

1 RJ-11 (2 wires) Line/Phone, 1 USB, RJ-45 (4 port), RS-232 Connection

Interoperable with major DLSAMs

DMT modulation and demodulation

USB interface (option)

Supports splitter less ADSL implementation

Built-in WLAN

Tone detection for low power mode

Support Annex A and Annex B

ATM SAR performed in software driver

ADSL Wireless Router Chip: (CX82310-14/24)

Specifications

Compliant with ADSL Standards

Full-rate ANSI T1.413 Issue 2 and ITU G.dmt(G.992.1) standards. Splitter less ITU G.lite (G.992.2)

Splitter Less

Full-rate Adaptive Modem

Maximum downstream 8 Mbps, Maximum upstream 1 Mbps

G Lite Adaptive Modem

Maximum downstream 1.5 Mbps, Maximum upstream 512 Kbps

WAN Mode Support

PPP over ATM (RFC 2364), PPP over Ethernet (RFC 2516)

LAN Mode Support

Bridged/routed Ethernet over ATM (RFC 2684/1483)

Classical IP over ATM (RFC 1577) and PPP over Ethernet (RFC 2516)

Bridge Mode Support

Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)

Supports up to 128 MAC addresses

Router Mode Support

IP routing RIPv2

Static Routing

DHCP Server and Client

NAPT (Network Address and Port Translation)

ICMP (Internet Control Message Protocol)

Ethernet Operation

IGMP (Internet Group Management Protocol)

Ethernet Interface

Compatible with IEEE 802.3 standard

4 Port 10/100 Ethernet Switch

10/100 Mbps auto selection

Support MDI-X auto crossover

802.11b Interface

Support for Intersil Prism-based designs (11Mbps)

Connects to an 802.11b PCMCIA card

128-bit and 64-bit WEP support

PTT and Safety

FCC Part 15/Part 68, CE, LVD

Power

External AC adapter

Input: 90-120V or 200-240V, 50/60Hz

Output: 9VAC/800mA

LED Indication

Power, Ready (Status), Showtime
( LINK/ACT), WLAN

4 Ethernet Port, 4 Link/Activity

Antenna

2 Antenna Optional

Size

196 mm x 150.5mm

Application Scenario