We are experts on FR circuitry. Our amplifier/UDC often comes with filters to do proper band shaping.
5.8GHz
802.11a 250mW Outdoor Amplifier
The 802.11a 250mW amplifier
is especially designed for outdoor unit with its
Low Noise Amplifier(LNA) that gives optimum performance when installed
near the antenna.
802.11a 250mWatt Indoor and
Outdoor Amplifier
RF Amplifier 5.8GHz Series
Amplifier Menu:
Please click drop down menu to choose:
Designed for extending the range of wireless radio devices
requiring high linearity amplfiication and is particularly
effective when used with Direct Sequence Spread Spectrum
(DSSS), Frequency Hopping Spread Spectrum (FHSS), and
802.11a Orthogonal Frequency Division Multiplexing (OFDM)
radio modems. This unit provides the transmit power
amplification as well
as receive signal gain.
Also available with the state of the art smart functions
in 900 MHz
and 2.4 GHz bands in several power options.
OEM, Military & Export Version
Technical
Specifications
Features:
250
mW Outdoor
Operating
Range:
5725-5875 MHz
Operating
Mode:
Bi-directional,
TDD
Transmit
Gain:
15 dB typical
Frequency
Response:
± 1 dB
Output
Power:
250 mW @ 9dBm input
TX
Input Power:
1 mW (0 dBm) min,
10 mW (10 dBm) max
Receiver
Gain:
12 dB typical
Noise
Figure:
3.5 dB typical
LED
Inidicators:
RED
GREEN/ORANGE
Solid
On: Power
and Receiving mode
Off: No Power
Blinking:
Transmitting
Connectors:
N-type Female
Lightning
Protection:
Direct DC ground
at antenna
DC
Surge Protection:
600 Watts TVS @
12 VDC
Power
Consumption:
2 A @ 12 VDC
Operating
Temperature:
-30 °C to +
70 °C
5.8 GHz 802.11a 250mW Outdoor
Item # 12-503
MADE IN THE USA
Product Note: The
Amplifiers listed on this page may also be referred
to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier,
2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier,
802.11g amplifier, 802.11b/g amplifier, 802.11 signal
booster, 802.11b signal booster, 802.11g signal booster,
802.11b/g signal booster, 4.9GHz – 5.3GHz –
5.7GHz – 5.8GHz amplifier, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amp, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amplifier, 4.9GHz –
5.3GHz – 5.7GHz – 5.8GHz signal booster,
802.11 amplifier, 802.11a amplifier, 802.11h amplifier,
802.11a – 802.11h – 802.11j amplifier, 802.11
signal booster, 802.11a signal booster, 802.11j signal
booster, 802.11a – 802.11h – 802.11j signal
booster, 900MHz amplifier, 900MHz amp, 900 amplifier,
900MHz signal booster, ISM amplifier, ISM signal booster,
antenna booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi ®
amplifier, wireless amplifier, wireless LAN amplifier,
and wlan amplifier.
Product Note: The
Amplifiers listed on this page may also be referred
to as: 4.9GHz – 5.3GHz – 5.7GHz –
5.8GHz amplifier, 4.9GHz – 5.3GHz – 5.7GHz
– 5.8GHz amp, 4.9GHz – 5.3GHz – 5.7GHz
– 5.8GHz amplifier, 4.9GHz – 5.3GHz –
5.7GHz – 5.8GHz signal booster, 802.11 amplifier,
802.11a amplifier, 802.11h amplifier, 802.11a –
802.11h – 802.11j amplifier, 802.11 signal booster,
802.11a signal booster, 802.11j signal booster, 802.11a
– 802.11h – 802.11j signal booster, antenna
booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi® amplifier, wireless amplifier,
wireless LAN amplifier, and wlan amplifier.
FCC NOTICE: The use of all radio equipment is subject
to radio regulations in each country. It is the responsibility
of the purchaser/installer/operator to insure that only
approved equipment/systems are deployed. For the ISM
band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured,
sold/or used in the USA, FCC Title 47, Part 15 governs
the sale, lease, use and manufacture of equipment (wireless
LAN cards, wireless Access points, amplifiers, etc.)
and prohibits the same unless such equipment is used
in the FCC-certified system configuration with which
such equipment is authorized.
