|
Designed for extending the range of 2.4 GHz wireless
radio devices, the
SmartAmp™ is particularly effective when used
with Direct Sequence or
Frequency Hopping Spread Spectrum radio modems. The
unit provides
the transmit power amplification as well as receive
signal gain.
The built-in dynamic power sensor in SmartAmp™
adjusts the Radio
Frequency (RF) power output level by reading the input
signal power. This Automatic Gain Control (AGC) Technology,
Teletronics' patented technology
effectively making the RF amplifiers "Plug &
Play" delivers the maximum
output power at various input levels while keeping the
distortion at a minimum.
Ideal for increasing the range of low power radio devices
and to
compensate for cable loss in certain installations.
OEM, Military & Export Version
| Technical
Specifications
|
|
Features: |
1 Watt
Indoor |
| Operating
Range: |
2400 - 2500 MHz |
| Operating
Mode: |
Bi-directional,
TDD |
| Transmit
Gain*: |
up to 24 dB |
| Frequency
Response: |
± 1 dB |
| Output
Power: |
1 Watt (+30 dBm) |
| TX
Input Power: |
0 dBm min
23 dBm max |
| Receiver
Gain: |
17 dB typical
|
| Noise
Figure: |
3.5 dB typical |
| LED
Inidicators: |
| RED |
GREEN/ORANGE |
| Solid
On: Power
and Receiving mode
Off: No Power |
Blinking:
Transmitting |
|
| Connectors: |
N-type, female,
50 Ohm |
| Lightning
Protection: |
Quarter Wave Technology |
| DC
Surge Protection: |
Available |
| Power
Consumption: |
Tx = 800 mA, Rx
= 130 mA @ 9V DC |
| Operating
Temperature: |
-40 °C to +
70 °C |
Dimensions: |
3" L x 3"
W x 1.07" H |
|
SmartAmp™ 2.4 GHz
1 Watt Indoor
Item # 12-213
MADE IN USA
|
*Transmit Gain is automatically adjusted
Product Note: The
Amplifiers listed on this page may also be referred
to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier,
2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier,
802.11g amplifier, 802.11b/g amplifier, 802.11 signal
booster, 802.11b signal booster, 802.11g signal booster,
802.11b/g signal booster, 4.9GHz – 5.3GHz –
5.7GHz – 5.8GHz amplifier, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amp, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amplifier, 4.9GHz –
5.3GHz – 5.7GHz – 5.8GHz signal booster,
802.11 amplifier, 802.11a amplifier, 802.11h amplifier,
802.11a – 802.11h – 802.11j amplifier, 802.11
signal booster, 802.11a signal booster, 802.11j signal
booster, 802.11a – 802.11h – 802.11j signal
booster, 900MHz amplifier, 900MHz amp, 900 amplifier,
900MHz signal booster, ISM amplifier, ISM signal booster,
antenna booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi ®
amplifier, wireless amplifier, wireless LAN amplifier,
and wlan amplifier. |
Product Note: The
Amplifiers listed on this page may also be referred
to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier,
2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier,
802.11g amplifier, 802.11b/g amplifier, 802.11 signal
booster, 802.11b signal booster, 802.11g signal booster,
802.11b/g signal booster, antenna booster, AGC amplifier,
antenna amplifier, Bi-directional amplifier, bidirectional
amplifier, hotspot amplifier, integrated amplifier,
PoE amplifier, RF amplifier, RF power amplifier, RF
signal amplifier, video amplifier, wifi amplifier, wi-fi®
amplifier, wireless amplifier, wireless LAN amplifier,
and wlan amplifier.
FCC NOTICE:
The use of all radio equipment is subject
to radio regulations in each country. It is the responsibility
of the purchaser/installer/operator to insure that only
approved equipment/systems are deployed. For the ISM
band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured,
sold/or used in the USA, FCC Title 47, Part 15 governs
the sale, lease, use and manufacture of equipment (wireless
LAN cards, wireless Access points, amplifiers, etc.)
and prohibits the same unless such equipment is used
in the FCC-certified system configuration with which
such equipment is authorized.
|
|
|
