EZPlatfrom System TT Serials Slab Serials Mesh Serials MIMO Serials BareBoard

 

EZPlatform® Plus
AP/Hotspot/Repeater

 

Bridges and Routers Menu: Please click drop down menu to choose:

 

Teletronics’ EZPlatform® AP/Hotspot/Repeater is designed to support 802.11n and1G BT fast Ethernet for high-power access point, hotspot and repeater applications. A powerful end-to-end system for a wireless Internet network can be built by integrating the EZPlatform™Plus with Teletronics subscriber units and other radios. The simplicity of use of the EZPlatform® Plus allows operators to quickly bring service to their customers, and with its serial port, GB Ethernet Ports, the EZPlatform® Plus is available in single or dual radio configuration, support MIMO 2.4 GHz or 5.8 GHz Combination radio cards up to 4T4R wireless network.


Technical Information
Ethernet IEEE 802.3 10BASE-T/100BASE-TX with autonegotiation
Networking Bridging mode, NAT gateway, static routing. DHCP client, DHCP server. VLAN, IEEE 802.1Q, SSID-based tagging. PPPoE, DDNS, STP, QoS, IPv6
Wireless           802.11a/b/g /n (2.4/5.8 GHz), turbo mode. Four SSIDs per interface, AP/Station mode, WDS. WEP, WPA, WPA2 encryption. Adjustable RF TX power and data rate. Hotspot: RADIUS authentication
Management     HTTP/HTTPS web configuration interface, TELNET. SNMPv2, remote syslog, local event log. Bandwidth control with upload/download rates. Configuration backup and restore, web-based firmware upgrade. Serial port rescue console, EZManager support
Security            IP address, MAC address and SSID filtering Firewall, 802.1X
Boot loader      RedBoot
Operating System Linux, 2.6.x kernel

Hardware Specifications
CPU    Atheros AR7161 network processor, 800 MHz
Memory           64 MB DDR SDRAM (max 128MB optional )
Storage            8 MB (max 16MB optional)
Ethernet interface          2 X 10/100/1000 T ( with Auto MDI / MDIX)
Serial interface  TTL RS-232 port
Wireless interface         Two Mini PCI slots
LED indicators Power, WLAN1 status, WLAN2 status
Power  PoE (24-48 V DC Jack), 802.11 af PoE (48V-56V)
Power consumption      4 W (Main Board); Max 25W
Dimensions       8 x 7.5 x 2.5 in
Weight             7 lb
Operating temperature  -20 °C to +70 °C, non-condensing
Enclosure         NEMA 4, ruggedized and weatherproof
Mounting          Wall mount, pole mount

 

EZP-F EZ Platform

EZPlatform Plus® AP/Hotspot/Repeater
item # 11-810

Product Information:

How to buy our products

EZPlatform FCC CERTIFICATE (PDF)

FCC NOTICE:

The use of all radio equipment is subject to
radio regulations in each country. It is the
responsibility of the purchaser/installer/operator
to insure that only approved equipment/systems
are deployed. For the ISM band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured, sold/or used
in the USA, FCC Title 47, Part 15 governs the sale,
lease, use and manufacture of equipment
(wireless LAN cards, wireless Access points, amplifiers, etc.) and prohibits the same unless
such equipment is used in the FCC-certified system configuration with which such equipment is authorized.


For information on Teletronics' FCC certified systems, please visit FCC Details.

 

 

 

Home | About Us | Tech Support | New Products | Complete Product List | Tradeshows | FAQs | Contact Us | Site Map | How to Buy our Products


© Copyright 2011 Teletronics International Inc.
Questions? Email us at: sales@teletronics.com

*Specifications are subject to change without prior notice