Accessories - One Stop Shopping at Teletronics

2.4GHz Antenna Alignment Kit
Center Frequency: 2445 MHz
Tx Output Power: 500 mW
RX Sensitivity: -100 dBm
Gain Adjustable Range: 50 dB
Battery Powered RX Unit
Connector: N-type Female
Operating Temp: -30°C to 70 °C

5.8GHz 802.11a 4-Pole Ultra-High
Quality Bandpass Filter
Features: 5.8GHz
Center Frequency: 5800 GHz
Bandwidth: 100 MHz
Insertion Loss: <0.3 dBm
Pass Band Ripple: <0.25 dBm
Return Loss: >20dB
Operating Temp: -40°C to 85°C
Out of Band Rejection: >35dB@5080MHz
>35dB@6490MHz
Harmonic Rejection: >90dbc
Power Handling: 50W
Connector Type: SMA Female
Cavity Number: 4
Dimensions: 3.9" x 1.1" x 0.56"
(99x28x14mm)
Weight: 0.09lbs (0.04kg)

2.15GHz High Power Bandpass
Cavity Filter 5W (3-Pole)
Features: 2.15GHz 3-Pole
Center Frequency: 2.150 GHz
Bandwidth: 100 MHz
Insertion Loss: <1.0 dB
Pass Band Ripple: <0.4 dB
Return Loss: >18.0 dB
Operating Temp: -30°C to 70 °C
Maximum Power: 50W
In/Out Impedance: 50
Connectors: SMA Female
Rejection: 20dB @ fc±110 MHz
Dimension: 2.7 x 1 x 0.75 inches

2.15GHz High Power Bandpass
Cavity Filter 5W (4-Pole)
Features: 2.15GHz 4-Pole
Center Frequency: 2.150 GHz
Bandwidth: 100 MHz
Insertion Loss: <1.0 dB
Pass Band Ripple: <0.4 dB
Return Loss: >18.0 dB
Operating Temp: -30°C to 70 °C
Maximum Power: 50W
In/Out Impedance: 50
Connectors: SMA Female
Rejection: 20dB @ fc±110 MHz
Dimension: 3 x 1 x 0.75 inches

5.8GHz High Power Bandpass
Cavity Filter 5W (3-Pole)
802.11a Compatible
Features: 5.8GHz 5W
Center Frequency: 5785 GHz
Bandwidth: 150 MHz
Insertion Loss: <0.5 dBm
Pass Band Ripple: <0.4 dBm
Return Loss: >18dB
Operating Temp: -30°C to 70 °C
Maximum Power: 50W
In/Out Impedance: 50
Connectors: SMA Female
Rejection: 50dB @ fc±620 MHz
Dimension: 2.9 x 1.03 x 0.37 inches

2.4GHz Cavity Bandpass Filter
(4-Pole)
Center Frequency: 2412.0
Bandwidth: 25.0 MHz
Insertion Loss: 1.5dBm
Pass Band Ripple: 0.5 dB
Return Loss: 18dB
Rejection: 50 dB @ fc +/- 27MHz
Power: 100W
Operating Temperature: -40°C to 70°C
Size: 56mm x 56mm x 21mm
Note: Cavity Bandpass Filters are also
available in custom frequencies for
large quantitiy purchases.

2.4GHz Cavity Bandpass Filter
(4-Pole)
Center Frequency: 2437.0
Bandwidth: 25.0 MHz
Insertion Loss: 1.5dBm
Pass Band Ripple: 0.5 dB
Return Loss: 18dB
Rejection: 50 dB @ fc +/- 27MHz
Power: 100W
Operating Temperature: -40°C to 70°C
Size: 56mm x 56mm x 21mm
Note: Cavity Bandpass Filters are also
available in custom frequencies for
large quantitiy purchases.

2.4GHz Cavity Bandpass Filter
(4-Pole)
Center Frequency: 2462.0
Bandwidth: 25.0 MHz
Insertion Loss: 1.5dBm
Pass Band Ripple: 0.5 dB
Return Loss: 18dB
Rejection: 50 dB @ fc +/- 27MHz
Power: 100W
Operating Temperature: -40°C to 70°C
Size: 56mm x 56mm x 21mm
Note: Cavity Bandpass Filters are also
available in custom frequencies for
large quantitiy purchases.

900 MHz Saw Filter
Center Frequency: 915 MHz
Pass Band: 902 - 928 MHz
Insertion Loss: 3 dB
Pass Band Variation: 1.5 dB
Return Loss: 10 dB
Rejection: 2700 MHz &
900 MHz, 45dB
Operating Temp: -20 °C to 70 °C
No. of Poles: 3 poles ceramic

2.4GHz Band Pass Filter
Center Frequency: 2442 MHz
Pass Band: 2400 - 2483.5 MHz
Insertion Loss: 3 dB
Pass Band Variation: 1.0 dBc max
Return Loss: 10dB
Rejection: 2700 MHz and
1900 MHz, 45dB
Operating Temp: -20 °C to 70 °C
No. of Poles: 3 poles ceramic

5.8GHz Band Pass Filter
Center Frequency: 5800 MHz
Pass Band: 5725 - 5875 MHz
Insertion Loss: 3 dB
Pass Band Variation: 1.0 dBc max
Return Loss: 10dB
Rejection: 5570 MHz and
6030 MHz, 6dB
Operating Temp: -20 °C to 70 °C
No. of Poles: 3 poles ceramic

2.4GHz Lightning Arrestor
(Gas Discharged)
Insertion Loss: 0.04dB at 900MHz
Insertion Loss: 0.07 dB at 1900MHz
Insertion Loss: 0.1 dB at 2.4GHz
VSWR: 1: 1.1
Uses: Gas Discharge Cartridge
Rated: 20 K Amp discharge
Max RF power: 75W
Available with: N-Female to
N-Female &
Connectors: N-Female to N-Male

2.4GHz Lightning Arrestor
(Quarterwave)
Quarter Wave Technology
Insertion Loss: 0.1dB at 1900MHz
Insertion Loss: 0.3 dB at 2.4 Ghz
Maintainence Free

5.8GHz Lightning Arrestor
(Quarterwave)
Quarter Wave Technology
Frequency Range: 5.8 GHz +/- 200 MHz
Impedence: 50 Ohm Nominal
VSWR: 1.2:1 Max
Return Loss: 2.1 dB Max
Insertion Loss: 0.5 dB Max
Surge Current: 1.25x50µs 6kv/3kv
Input Power: 100 Watt
Body Finish: White Bronze
Contact: Silver Plated

Teletronics Surge Protection Board
Standard Compliance: IEC 61000-4-5
Surge Immunity Test Pass
Data Rate: 100 Mbps
PoE Support: Yes
Power: RJ45 Pin 4, 5 V+; 7, 8 V-
Signal: RJ45 Pin 1, 2, 3, 6
Interface: RJ-45 x 2
DC Power Input: 48V DC
Output Voltage: 48V DC
Operating Temp: -20 °C to 70 °C
Operating Humidity: 10% to 80%

5.8GHz Two Way Power Splitter
Typical Insertion Loss: 0.6 dB
VSWR: 1: 1.5
Phase Unbalance: 5°
Amplitude Unbalance: 0.5 dB

2.4GHz Two Way Power Splitter
Frequency Range: 800 - 2500 MHz
Typical Insertion Loss: 3.5 dB
VSWR: ≤ 1.3
Isolation: ≥20 dB
Temperature: -25°C - 55°C
Connector: N-Female
Power: 35 W
Humidity: 5 ~ 95%
Dimension: 62mm x 55mm x 19mm
Weight: 170g

2.2 - 2.6GHz Three Way Power Splitter
Frequency Range: 2200 - 2600 MHz
Typical Insertion Loss: 5.4 dB
VSWR: 1.3
Band Pass Ripple: 3°
Impedance: 50 Ohm
Phase Balance Max: 1.3
Isolation: 20 dB
Temperature: -25°C - 55°C
Connector: N-K Female
Power: 35 W
Humidity: 5 ~ 95%
Dimension: 2.7" x 2.3" x 0.7"
Weight: 220g

2.4GHz Four Way Power Splitter
Typical Insertion Loss: 0.6 dB
VSWR: 1: 1.3
Isolation: 30 dB
Phase Unbalance: 8°
Amplitude Unbalance: 0.6 dB
*Use a 50 Ohm terminator for each

Bias-Tee/DC Injector
Bias current: 5A max
DC Voltage: 15V max
(Max) insertion loss: 0.3 dB (Typ),
0.5, dB
RF Power: up to 30W
Connectors: N-type Female

CAT-5 Power Insertor
Power Insertor: Cat-5
DC Power Jack size (center pin):
2.1mm or 2.5mm
Case Dimensions:
3.5" L x 2.6 W x 1.25" H
(8.9 cm L x 6.6 cm W x 3.2 cm H)
Ethernet Port Pin Layout for Voltage Polarity:
Pin 4 and 5 = Positive (+) voltage
Pin 7 and 8 = Negative (-) voltage

Metal Enclosure CAT-5 Power Insertor
Power Insertor: Cat-5
DC Power Jack size (center pin):
2.1mm or 2.5mm
Case Dimensions:
3.5" L x 2.6 W x 1.25" H
(8.9 cm L x 6.6 cm W x 3.2 cm H)
Ethernet Port Pin Layout for Voltage Polarity:
Pin 4 and 5 = Positive (+) voltage
Pin 7 and 8 = Negative (-) voltage

PoE with Surge Protection
Power Insertor: Cat-5
DC Power Jack size (center pin):
2.5mm
DC Power Input 12V-48V, Output 48V
Case Dimensions:
3.5" L x 2.6 W x 1.25" H
(8.9 cm L x 6.6 cm W x 3.2 cm H)
Ethernet Port Pin Layout for Voltage Polarity:
Pin 4 and 5 = Positive (+) voltage
Pin 7 and 8 = Negative (-) voltage

CAT-5 Power Extractor
Power Insertor: Cat-5
Cat-5 Power Input 12-48 V
DC Output: 9 V @ 2 A
DC Power Jack size (center pin):
2.1mm or 2.5 mm
TVs protection: 1500 Watt
Case Dimensions:
3.5" L x 2.6" W x 1.25" H
(8.9 cm L x 6.6 cm W x 3.2 cm H)
PCB Dimensions:
2.5" L x 2.25" W x 0.5" H
(6.4 cm L x 5.7 cm W x 1.3 cm H)
Ethernet Port Pin Layout for Voltage Polarity: (#17-103)
Pin 4 and 5 = Positive (+) voltage
Pin 7 and 8 = Negative (-) voltage

Customized Voltage Available

Universal Power Supplies
Item#: 17-301 (7.5VDC, 1.2A)
Item#: 17-303 (12VDC, 4A)
Item#: 17-304 (9VDC, 1.5A)
Item#: 17-306 (24VDC, 1.0A)
Item#: 17-308 (48VDC, 0.5A)

Waterproof RJ-45 Connector
Connector Assembly Diagram
Twist-On Connection
Diameter: 23.6
Inches: .93