|
Designed for extending the range of 900 MHz wireless
radio
devices, the SmartAmp™ is particularly effective
when used with
Direct Sequence or Frequency Hopping Spread Spectrum
radio
modems. The unit provides the transmit power amplification
as
well as receive signal gain.
Full output power of 1W is achieved with only 4mW input
to the
amplifier. Above 4mW input, the SmartAmp attenuates
the input
signal power and maintains the output power typically
at 1W.
Substantial discounts available for OEMs and large volume
purchases. Also available in 2.4 & 5.8GHz versions.
The built-in dynamic power sensor in SmartAmp™
adjusts
the Radio Frequency (RF) power output level by reading
the
input signal power. This Automatic Gain Control (AGC)
Technology, Teletronics' patented technology effectively
making the RF amplifiers "Plug & Play"
delivers the maximum
output power at various input levels while keeping the
distortion
at a minimum.
OEM,
Military & Export Version
|
900 MHz
SmartAmp™ 1 Watt
Item# 12-101
MADE IN THE USA
|
| Technical
Specifications
|
|
Features: |
1Watt |
| Operating
Range: |
902-928 MHz |
| Operating
Mode: |
Bi-directional, TDD |
| Transmit
Gain*: |
up to 24dB |
| Frequency
Response: |
± 1 dB |
| Output
Power: |
1 Watt (+30dBm) |
| TX
Input Power: |
0 dBm min
23 dBm max |
| Receiver
Gain: |
16 dB typical |
| Noise
Figure: |
3.5 dB typical |
| LED
Inidicators: |
| RED |
GREEN/ORANGE |
| Solid
On: Power
and Receiving mode
Off: No Power |
Blinking: Transmitting |
|
| Connectors: |
N-type, female, 50 Ohm |
| Lightning
Protection: |
Quarter Wave Technology |
| DC
Surge Protection: |
Available |
| Power
Consumption: |
Tx = 1.2A, Rx = 130 mA
@ 9VDC |
| Operating
Temperature: |
-40 °C to + 70 °C
|
Dimensions:
|
4.25" L x 3.25"
W x 1.75" H |
*Transmit Gain is automatically
adjusted
Product Note: The
Amplifiers listed on this page may also be referred
to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier,
2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier,
802.11g amplifier, 802.11b/g amplifier, 802.11 signal
booster, 802.11b signal booster, 802.11g signal booster,
802.11b/g signal booster, 4.9GHz – 5.3GHz –
5.7GHz – 5.8GHz amplifier, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amp, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amplifier, 4.9GHz –
5.3GHz – 5.7GHz – 5.8GHz signal booster,
802.11 amplifier, 802.11a amplifier, 802.11h amplifier,
802.11a – 802.11h – 802.11j amplifier, 802.11
signal booster, 802.11a signal booster, 802.11j signal
booster, 802.11a – 802.11h – 802.11j signal
booster, 900MHz amplifier, 900MHz amp, 900 amplifier,
900MHz signal booster, ISM amplifier, ISM signal booster,
antenna booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi ®
amplifier, wireless amplifier, wireless LAN amplifier,
and wlan amplifier. |
The Amplifiers listed
on this page may also be referred to as: 900MHz amplifier,
900MHz amp, 900 amplifier, 900MHz signal booster, antenna
booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi® amplifier, wireless amplifier,
wireless LAN amplifier, and wlan amplifier.
FCC NOTICE:
The use of all radio equipment is subject
to radio regulations in each country. It is the responsibility
of the purchaser/installer/operator to insure that only
approved equipment/systems are deployed. For the ISM
band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured,
sold/or used in the USA, FCC Title 47, Part 15 governs
the sale, lease, use and manufacture of equipment (wireless
LAN cards, wireless Access points, amplifiers, etc.)
and prohibits the same unless such equipment is used
in the FCC-certified system configuration with which
such equipment is authorized.
|
|
