We are experts on FR circuitry. Our amplifier/UDC often comes with filters to do proper band shaping.
SmartAmp™
Bi-Directional 900MHz 25W
This SmartAmp™
Bi-Directional 900MHz 25W is particularly effective when
used with Direct Sequence or Frequency Hopping Spread Specturm radios.
SmartAmp™
Bi-Directional
RF Amplifier 900 MHz Series, 25 Watt
Amplifier Menu:
Please click drop down menu to choose:
Full output power of 25 W is achieved with only 32mW
input to the amplifier. Above 32 mW input, the SmartAmp™
attenuates the input signal power and maintains the
output power typically at 25W.
The built-in
dynamic power sensor in SmartAmp™ adjusts the
Radio Frequency (RF) power output level by reading the
input signal power. This Automatic Gain Control (AGC)
Technology, Teletronics' patented technology effectively
making the RF amplifiers "Plug & Play"
delivers the maximum output power at various input levels
while keeping the distortion at a minimum.
OEM,
Military & Export Version
Technical
Specifications
Features:
25
Watt
Operating
Range:
902 - 928 MHz
Operating
Mode:
Bi-directional,
TDD
Transmit
Gain:
28 dB (can be customized
to 33dB)
Frequency
Response:
± 0.75 dB
over operating range
Output
Power:
25 Watt (+44 dBm)
nominal
TX
Input Power:
500mW
Receiver
Gain:
12 dB typical ±1
dB
Noise
Figure:
3.5 dB typical
LED
Inidicators:
RED
GREEN/ORANGE
Solid
On: Power
and Receiving mode
Off: No Power
Blinking:
Transmitting
Connectors:
N-type, female,
50 Ohm
Lightning
Protection:
Quarter Wave Technology
DC
Surge Protection:
Available
Power
Consumption:
3A @ 28 VDC
Operating
Temperature:
Amplifier: -30
°C to + 70 °C
15V DC injector: -30 °C to + 70 °C
Product Note: The
Amplifiers listed on this page may also be referred
to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier,
2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier,
802.11g amplifier, 802.11b/g amplifier, 802.11 signal
booster, 802.11b signal booster, 802.11g signal booster,
802.11b/g signal booster, 4.9GHz – 5.3GHz –
5.7GHz – 5.8GHz amplifier, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amp, 4.9GHz – 5.3GHz
– 5.7GHz – 5.8GHz amplifier, 4.9GHz –
5.3GHz – 5.7GHz – 5.8GHz signal booster,
802.11 amplifier, 802.11a amplifier, 802.11h amplifier,
802.11a – 802.11h – 802.11j amplifier, 802.11
signal booster, 802.11a signal booster, 802.11j signal
booster, 802.11a – 802.11h – 802.11j signal
booster, 900MHz amplifier, 900MHz amp, 900 amplifier,
900MHz signal booster, ISM amplifier, ISM signal booster,
antenna booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi ®
amplifier, wireless amplifier, wireless LAN amplifier,
and wlan amplifier.
The Amplifiers listed
on this page may also be referred to as: 900MHz amplifier,
900MHz amp, 900 amplifier, 900MHz signal booster, antenna
booster, AGC amplifier, antenna amplifier, Bi-directional
amplifier, bidirectional amplifier, hotspot amplifier,
integrated amplifier, PoE amplifier, RF amplifier, RF
power amplifier, RF signal amplifier, video amplifier,
wifi amplifier, wi-fi® amplifier, wireless amplifier,
wireless LAN amplifier, and wlan amplifier.
FCC NOTICE: The use of all radio equipment is subject
to radio regulations in each country. It is the responsibility
of the purchaser/installer/operator to insure that only
approved equipment/systems are deployed. For the ISM
band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured,
sold/or used in the USA, FCC Title 47, Part 15 governs
the sale, lease, use and manufacture of equipment (wireless
LAN cards, wireless Access points, amplifiers, etc.)
and prohibits the same unless such equipment is used
in the FCC-certified system configuration with which
such equipment is authorized.
