We are experts on FR circuitry. Our amplifier/UDC often comes with filters to do proper band shaping.

2.4GHz SmartAmp™ Bi-Directional Amplifier

This Bi-Directional amplifier is ideal for increasing the range of low power radio devices
and to compensate for cable loss in certain installations.

SmartAmp™ Bi-directional Amplifier Signal Booster

Wi-Fi RF Amplifier 2.4GHz Series, 8 Watt Outdoor Version

Amplifier Menu: Please click drop down menu to choose:

SmartAmp™ is designed for extending the range of ISM Band of 900MHz, 2.4 GHz and 5.8GHz wireless radio devices, It support IEEE 802.11b/g/n or 802.11a/n radio. The SmartAmp™ is in Bi-directional, TDD operation mode, provides the transmit power amplification as well as receive signal gain. The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum.
Ideal for increasing the range of low power radio device and to compensate for cable loss in certain installations.

Contact sales office for details.
OEM, Military & Export Version

Technical Specifications

Features:

8 Watt Outdoor

Operating Range:

2400 - 2500 MHz

Operating Mode:

TDD, Time Division duplex

Transmit Gain:

23 dBm

Frequency Response:

± 1 dB

Output Power:

8 Watt (+39 dBm)

TX Input Power:

0 dBm min
20 dBm max

Receiver Gain:

10-14db, 12dB typical

Noise Figure:

≤3.5dB typical

LED Inidicators:

RED	GREEN
ON: Transmitting	Solid On: Power and Receiving mode Off: No Power

Connectors:

N-type, female, 50 Ohm

Lightning Protection:

Direct DC ground at antenna

DC Surge Protection:

Available

Power Consumption:

12V 2A DC

Operating Temperature:

-30 °C to + 60 °C

AMP Dimensions:

5" L x 3" W x 1-1/8" H

Weight

Amplifier 1.6Lb/ Package 3Lb

SmartAmp™ 2.4 GHz
8Watt Outdoor
Item # 12-208RFW
MADE IN USA

Product Information:

Data Sheet (PDF)
Technical Specs

Product Note: The Amplifiers listed on this page may also be referred to as: WiFi Signal Booster, 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier, 2.4GHz signal booster, 802.11 amplifier, 802.11b/g/n amplifier, 802.11n amplifier, 802.11n amplifier, 802.11 signal booster, 802.11b/g/n signal booster, 802.11n signal booster, 802.11n signal booster, 4.9GHz - 5.3GHz - 5.7GHz - 5.8GHz amplifier, 4.9GHz - 5.3GHz - 5.7GHz - 5.8GHz amp, 4.9GHz - 5.3GHz - 5.7GHz - 5.8GHz amplifier, 4.9GHz - 5.3GHz - 5.7GHz - 5.8GHz signal booster, 802.11a/n amplifier, 802.11a amplifier, 802.11h amplifier, 802.11a - 802.11h - 802.11j amplifier, 802.11a/n signal booster, 802.11a signal booster, 802.11j signal booster, 802.11a - 802.11h - 802.11j signal booster, 900MHz amplifier, 900MHz amp, 900 amplifier, 900MHz signal booster, ISM amplifier, ISM signal booster, antenna booster, AGC amplifier, antenna amplifier, Bi-directional amplifier, bidirectional amplifier, hotspot amplifier, integrated amplifier, PoE amplifier, RF amplifier, RF power amplifier, RF signal amplifier, video amplifier, wifi amplifier, wi-fi ® amplifier, wireless amplifier, wireless LAN amplifier, and wlan amplifier. CCTV Signal Booster

FCC NOTICE: The use of all radio equipment is subject to radio regulations in each country. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. For the ISM band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured, sold/or used in the USA, FCC Title 47, Part 15 governs the sale, lease, use and manufacture of equipment (wireless LAN cards, wireless Access points, amplifiers, etc.) and prohibits the same unless such equipment is used in the FCC-certified system configuration with which such equipment is authorized.