Amplifiers Un Down Converters

 

2.4GHz Outdoor SmartAmp™ Bi-Directional Amplifier 10 Watt

 

This Bi-Directional amplifier is ideal for increasing the range of low power radio devices
and to compensate for cable loss in certain installations.

 
 

SmartAmp™ Bi-directional Amplifier Signal Booster

 

Wi-Fi RF Amplifier 2.4GHz Series, 10 Watt Outdoor Version

 

Amplifier Menu: Please click drop down menu to choose:

Designed for extending the range of 2.4 GHz wireless radio devices, the Smart-Amp is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides transmit power amplification and receives signal gain.

Full output power of 10W is achieved with only 2.5mW input to the amplifier. Above 2.5 mW input, the smartamp attenuates the input signal power and maintains the output power typically at 10W.

Substantial discounts available for OEMs and large volume purchases.

Due to the high RF power outputs these units are only offered for sale to Military, OEM, licensed or overseas customers.

Technical Specifications

Features:

10 Watt

Operating Range:

2400 - 2500 MHz

Operating Mode:

Time Division duplex, TDD

Transmit Gain:

up to 30 dB

Output Power:

40 dBm, 10 Watt

TX Input Power:

3 dBm (2 mW) min
25 dBm (500 mW) max

Receiver Gain:

12 dB

Noise Figure:

2.8 dB typical

Power Consumption:

55mA RX, 1.8A Tx @ 28 VDC

LED Inidicators:

RED

GREEN/ORANGE

Solid On: Power
and Receiving mode
Off: No Power

Blinking: Transmitting

Connectors:

N-type, female, 50 Ohm

Lightning Protection:

Quarter Wave Technology

DC Surge Protection:

Available

DC Power:

28VDC via power over coax, using DC injector

Operating Temperature:

-40 °C to + 65 °C

AMP Dimensions:

7.5” L X 6.0” W X 3.0”H

Weight

2.8 lbs


SmartAmp™ 2.4 GHz

10Watt Outdoor
Item # 12-209
MADE IN USA

Product Information:

Data Sheet (PDF)
Technical Specs

How to buy our products


FCC NOTICE

The use of all radio equipment is subject to radio regulations in each country. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. For the ISM band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured, sold/or used in the USA, FCC Title 47, Part 15 governs the sale, lease, use and manufacture of equipment (wireless LAN cards, wireless Access points, ampliers, etc.) andprohibits the same unless such equipment is used in the FCC-certied system conguratio n with which such equipment is authorized.

 

Product Note: The Amplifiers listed on this page may also be referred to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier, 2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier, 802.11g amplifier, 802.11b/g amplifier, 802.11 signal booster, 802.11b signal booster, 802.11g signal booster, 802.11b/g signal booster, 4.9GHz – 5.3GHz – 5.7GHz – 5.8GHz amplifier, 4.9GHz – 5.3GHz – 5.7GHz – 5.8GHz amp, 4.9GHz – 5.3GHz – 5.7GHz – 5.8GHz amplifier, 4.9GHz – 5.3GHz – 5.7GHz – 5.8GHz signal booster, 802.11 amplifier, 802.11a amplifier, 802.11h amplifier, 802.11a – 802.11h – 802.11j amplifier, 802.11 signal booster, 802.11a signal booster, 802.11j signal booster, 802.11a – 802.11h – 802.11j signal booster, 900MHz amplifier, 900MHz amp, 900 amplifier, 900MHz signal booster, ISM amplifier, ISM signal booster, antenna booster, AGC amplifier, antenna amplifier, Bi-directional amplifier, bidirectional amplifier, hotspot amplifier, integrated amplifier, PoE amplifier, RF amplifier, RF power amplifier, RF signal amplifier, video amplifier, wifi amplifier, wi-fi ® amplifier, wireless amplifier, wireless LAN amplifier, and wlan amplifier.

Product Note: The Amplifiers listed on this page may also be referred to as: 2.4GHz amplifier, 2.4GHz amp, 2.4 amplifier, 2.4GHz signal booster, 802.11 amplifier, 802.11b amplifier, 802.11g amplifier, 802.11b/g amplifier, 802.11 signal booster, 802.11b signal booster, 802.11g signal booster, 802.11b/g signal booster, antenna booster, AGC amplifier, antenna amplifier, Bi-directional amplifier, bidirectional amplifier, hotspot amplifier, integrated amplifier, PoE amplifier, RF amplifier, RF power amplifier, RF signal amplifier, video amplifier, wifi amplifier, wi-fi® amplifier, wireless amplifier, wireless LAN amplifier, and wlan amplifier.

FCC NOTICE:
The use of all radio equipment is subject to radio regulations in each country. It is the responsibility of the purchaser/installer/operator to insure that only approved equipment/systems are deployed. For the ISM band (900MHz, 2.4GHz, 5.7GHz) equipment manufactured, sold/or used in the USA, FCC Title 47, Part 15 governs the sale, lease, use and manufacture of equipment (wireless LAN cards, wireless Access points, amplifiers, etc.) and prohibits the same unless such equipment is used in the FCC-certified system configuration with which such equipment is authorized.

 

 

Home | About Us | Tech Support | New Products | Complete Product List | Tradeshows | FAQs | Contact Us | Site Map | How to Buy our Products


© Copyright 2011 Teletronics International Inc.
Questions? Email us at: sales@teletronics.com

*Specifications are subject to change without prior notice